How to choose a scooter?

The clearance height of the tread surface is not more than 5.5 cm (the height at which the rider stands - 8 cm). The higher the tread, the more the leg has to bend at each bounce and the more force and effort is required. On CRUSSIS scooters you can ride tens of kilometres a day without much effort (even 100 km is no exception for a recreational scooterist).

Hubs with industrial bearings ensure minimum rolling resistance. This is very important as industrial bearing hubs have significantly less rolling resistance than tapered roller bearing hubs. You can tell by lifting the scooter and spinning the wheel with an industrial bearing, you can go make coffee in the meantime. When you drink it, the wheel will still be spinning. If you spin a wheel with a conventional fan bearing in the same way, the wheel will stop after a few revolutions. On very cheap scooters, you will sometimes be glad if the wheel makes at least 3 turns on its own. This all makes for an easy and comfortable ride, where the rider on the scooter, after setting it in motion, is not held back by poor quality bearings with ordinary cheap fan bearings and wastes no energy intended to move the whole scooter. So you don't have to bounce as often, and as hard, to achieve a comfortable ride.

A solid frame that does not bend on reflection. A flexible frame takes away your rebound energy, while a rigid frame transfers maximum rider energy into the scooter's movement. CRUSSIS scooters have minimal flex, they are made of 3mm wide steel tube which is not only strong but also safe enough.

High-quality tyres that, like a car, reduce drag and increase driving safety. CRUSSIS scooters are equipped with tyres from the renowned Schwalbe brand . Quality tyres with their composition, radius and especially the possibility to inflate them to a higher pressure, ensure minimum rolling resistance. Cheap scooters are usually equipped with NO-NAME tyres of the lowest quality, which can only be inflated to about half the pressure of Schwalbe tyres. With high-quality tyres, you don't have to bounce so often and with such force, you save energy and have a very comfortable ride.

Quality brakes for your safety. CRUSSIS scooters are equipped with TEKTRO brake systems, which are among the top brake systems in terms of quality. You will notice that the brake levers do not soften even under heavy braking and if they are set correctly, you will not squeeze the lever all the way to the handle even under heavy braking. In addition, they have a very good braking effect. In contrast, the cheapest NO-NAME brakes are used on cheap scooters, which you usually squeeze very lightly when braking up to the handle, and thus you can no longer squeeze the lever and thus increase the braking force. The result is that in the case of poor quality braking systems you don't stop the scooter immediately. The entire NO-NAME braking system is usually of very poor quality. Compared to these braking systems, CRUSSIS scooters equipped with TEKTRO brakes have a significantly higher braking effect, which means that if necessary, you can stop the scooter in a much shorter distance when braking intensively (up to 3 times shorter distances with TEKTRO brakes). This allows you to stop safely in a crisis situation and thus avoid an accident or injury due to an accident.